AEMC MN307 Compact AC Current Probe with 5' Lead, 0.1A to 12A Range, 100mVAC/A Output

The model MN307 is the latest in compact AC current probes. It is designed to meet the most stringent demands in industry and electrical contracting. Model MN307 meets EN 61010, 600V, category III safety standards and is CE Marked and UL approved for Canada and United States. The Model MN307 has a 20mm jaw opening and accommodate conductors up to 250MCM. The unique hooked jaw design facilitates clamping and hooking onto conductors. Polycarbonate materials and ultrasonic welding are used throughout to ensure ruggedness and overall lasting reliability. The model MN307 is a high performance model and uses a custom nickel core to improve accuracy and phase shift on the low end of the measurement range. The model MN307 is an excellent probe to be used in power and low level current measurement applications. Measurement range of 0.01 to 12A. Designed for DMMs, loggers, recorders and oscilloscopes. 40Hz to 10kHz response. 100mV/A output signal. Transformation Ratio: Voltage output. Overload: 12A for continuous. Limit Operating Conditions: 200A permanently to 3kHz; Derating above 3kHz: 200A x (1/0.333F), F in kHz. Crest Factor: 3 at 10A RMS with an error (due to CF) of 3 percent. Working/Common Mode Voltage: 600Vrms. Output Termination: 5 feet lead. Operating Temperature: 14 to 131 degree F. Storage Temperature: -40 to 158 degree F. Operating Relative Humidity: 10 to 35 degree C 85 percent RH (without roll-off above 35 degree C). Measures 5-15/32" length by 2" width by 1-11/64" height. Polycarbonate Material: Polycarbonate with fiberglass charge, UL94 V0.

• Small, compact size
• Large jaw opening accommodated conductors up to 250kcmil
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to EN 61010, 600V CAT III
• Applications: measuring in breaker panels, industrial loads, HVAC, residential and commercial sites, 5A secondary current transformers (CTs) monitoring, data logging/recording